Ecostar 450 Glass Adhesive Dispensing Machine (variable)
This variable machine for manifold industrial applications comes with all the advantages of the economical Ecostar 250 - plus a high-performance hydraulic system for higher output rates - plus a user friendly PLC (programmable logic controller) with display in plain text - plus a large number of further options.
Thus as one option for example the electronic dosing control unit enables you to a permanent monitoring and date capture of the quality of your product.
The capturing process can also be effected with an external control unit or PC. Adjust your machine in the best way to your personal requirements. The range of options will not leave any open wishes!
| Technical Data | |
|---|---|
| Output | ca. 4.500 g/min (depending on material viscosity) |
| Mixing ratio volumetric | 100:16 to 100:7 continuously adjustable; through exchange of pump; other mixing ratios available |
| Connected loads electrical |
3x400 V, PE, N, 50 Hz, 4,0-7,0 kW (if required also special voltage) |
| Connected loads pneumatic |
6 bar, max. 50 l/min |
| Dimensions (L x B x H1, H2, H3) H1: loading height, H2: max. working height, H3: height swivel arm |
1.380 x 1.215 x 1.850, 3.500, 2.800 |
| Weight | ca. 580 - 800 kg depending on equipment |
| Standard Equipment |
|
| • Adjustable mixing ratio • Dosage control device • Material shortage control • Over-pressur safety device • Follow plate for reduce residue • Mixing unit Alpha-Mix for PS with 2 mixing chambers • Mixing unit Alpha-Mix for PU/SI with 3 mixing chambers • Mixing unit Alpha-Mix for SI with anti-adhesive coating • Low-maintenance dosing pump sealing system • Hydraulic dosing pump drive • Empty drum warning system for component A • 200l drum garage for ergonomic drum change • PLC (programmable logic controller) with display in plain text • Error display in plain text • Pot life control • Follow plate heating unit for component A (PS/PU only) • Two-hand control for 200l drum press |
|
| Options | |
| • Pivot arm, 3.500 mm long • Application manipulator, 3.300 mm long • Heating component A up to swivel arm • Automatic rinsing component A • Cartridge filler facility • Permanent electronic mixing ratio control MCS • Process data capturing • Feeding pump component B for 200l drum (PU only) • Extension hose (PS/PU) extra charge per m • Extension hose (SI) extra charge per m • Special coat of laquer |
|
| Additional Equipment | |
| • Device for rinsing with solvent • Freezer NF 1.0 - 25/50 /PU/PS/SI |
|
high performance adhesive technology
