UV Lamps and Equipment
Eurobond Adhesives Ltd are the exclusive UK distributor of Honle UV light equipment for adhesives bonding/sealing applications. Honle are recognised throughout the world as one of the leading manufacturers of UV light equipment.
All light systems, UV measuring systems, bulbs, service and repair work is carried out at their modern factory located in Munich, Germany.
 |
UV Hand/Flood Lamp – The UVH255 hand lamp is an ideal budget lamp for use in curing adhesives used in acrylic/glass bonding or PCB applications. This 250Watt high intensity lamp irradiates at 365nm and is fitted with a blue glass filter to reduce glare. |
 |
UVA250 Hand is a high intensity hand-held UV lamp. It is ergonomically designed and easy for the operator/fabricator to use. It’s high power and intensity ensures reliable production results within seconds. It is ideal for curing UV reactive adhesives and compounds. Typical applications include acrylic and glass bonding/fabrication. |
 |
UVASPOT is a versatile UV unit for larger areas. Suitable for curing UV reactive adhesives, compounds and coatings, as well as providing black light for fluorescent purposes. 3 power steps available: 400, 1000 & 2000W. Modular concept for uniform irradiation of large areas using a combination of a large number of lamp modules Different spectra acheivable through various lamp and filter combinations Lamp house cooling by fan or convection, with a separate ballast box Where equipment is used to irradiate large areas, the ballast boxes can be integrated into one switch cabinet. A Black light version is available for fluorescent applications (UVASPOT 400/T-BL) |
 |
UVACUBE 400 - Basic curing chamber for curing of UV reactive coatings, adhesives and compounds as well as for sun simulation and material ageing. Closed desktop unit especially designed for manufacture by hand and laboratory use Different spectra available through various lamp-/filter-combinations Irradiated area approx. 30 cm x 40 cm |
 |
Bluepoint 2 Easycure - Economical version of bluepoint with the following features: Long lamp life Adjustable lamp output Interface to PLC 1-4 light guides |
 |
Bluepoint 4 High performance UV spot source for precise curing of UV reactive adhesives and compounds. Powerful spot source with infinitely variable UV intensity between 2.000 and 14.000 mW/cm² UVA * Long service life (typically approx. 3.000 hours) combined with a small intensity reduction thanks to new lamp technology. Easy lamp exchange through a side out module at the front panel. User-friendly and menu-driven operation. Possibility to program complete exposure sequences. Automatic calibration and power readjustment in combination with a Dr. Hönle UV Meter RS 232 and PLC interface as well as additional relay contact with selectable function. Electronic ballast with automatic adjustment to any AC mains supply. Interchangeable filters for different wavelength areas available. All parameter settings can be memorized on 6 storage locations and loaded when needed. Software update via internet |
 |
UV Meter - High End Version Measurement of UV intensity and dosage for spot and flood cure units. Intensity and dosage measurement with up to 8 interchangeable sensors (automatic sensor recognition). Two channel measuring for different wavelength spectra. Data storage for recording measurement sequences. Auto start of measurement when minimum values are exceeded. Automatic switching between measurement ranges. Measurement values displayed in different units (mW/cm², W/cm² or W/m²) Integrated real-time clock (e.g. for documentation purposes and long-term measurements) Docking station with accumulator charging connection and RS232 interface for transmission and evaluation of measured values at the computer. |
|
UV Meter - Basic Version As abover except: Only one-channel measurement No data storage No docking station, i.e. no accumulator charging connection. No RS232 interface No power pack Accessories: Single sensors UVA (330 nm - 400 nm); maximum intensity 5 W/cm² UVB (290 nm - 330 nm); maximum intensity 2 W/cm² UVC (230 nm - 285 nm); maximum intensity 2 W/cm² VIS (420 nm - 520 nm); maximum intensity 5 W/cm² Light guide and quartz rod sensors UVA (330 nm - 400 nm); maximum intensity 20 W/cm² UVC (230 nm - 285 nm); maximum intensity 1 W/cm² |
 |
UVA Handheld meter This is a low cost meter with a simple point and read UV value operation. Excellent value at just £135 plus vat. |
 |
UV Flood LED line is ideal for bonding edges (LED lines) particularly in glass bonding applications. The LED Flood lamp is ideal for curing adhesives and coatings on larger surface areas. Features: Even distribution of irradiation over bond areas. Low generation of heat so ideal for curing adhesives/coatings on heat sensitive substrates. |
 |
LED UV-Pen Reliable LED point source Monochromatic spectrum around 365 nm. No start up phase. UVA intensity: 800 mW/cm2 |
|
LED Power Pen Reliable LED point source Monochromatic spectrum around 365 nm No start up phase UVA intensity: 3,500 mW/cm2 |
 |
UV 26 Watt lamp for UV fluorescence Compact, lightweight and durable. Plastic front cover for UV bulb protection. Aluminium reflector for optimum UV light output. Mounting bracket. UV 26W blacklight blue bulb Triple turn compact fluorescent Power supply requirement 230V/50Hz Power 26W. Only one left in stock just £147 plus vat |
 |
250 Watt UV bulbs. Available in Gallium or Iron doped |
 |
UV protecting spectacles. Tough and robust design with yellow tinted lenses to reduce glare from sunlight and use of illuminated UV lamps. |
 |
UVP 200 light guide This lamp is an ex-demonstrator unit with only 149 hours on the tacho. It is in superb working condition and comes with a foot switch operation and one light guide. This unit is available at £495 plus vat. |
high performance adhesive technology
